4-8-8-4: 4'-8½" UP: UP engine house, Cheyenne, WY: operational: Alco (Schenectady) #69585, 11/1941: From Pomona, CA. Reacquired by the Union Pacific in July 2013. Restored to operation on May 1, 2019. Converted to burn oil. Temporarily uses the tender of UP 3985. Became the first-ever steam locomotive to be equipped with Positive Train Control ...These locomotives were the first in a large series of 4-8-4s of very similar design that totalled more than 200 engines. U-2a (works #1800-1819) numbered from 6100 to 6119 and delivered from Canadian Loco Works in 1927. U-2b (6120-6139), delivered from Montreal in 1927 (works #67351-67370), identical except for 233,400-lb weight on drivers and ...The Baldwin 4-8+8-4 750/8DE1 was the Baldwin Locomotive Works ' first attempt at building a road diesel locomotive. The trucks were configured in a 2-D+D-2 wheel arrangement. Only a single test unit was built. In 1943 Baldwin built an experimental "Centipede" as a demonstrator unit, which was assigned road #6000. 4-8-4 Steam Locomotives. Category page. Edit. A 4-8-4 "Northern" is a type of wheel-arrangement for a large tender-type steam locomotive. Which refers to engines with 4 leading wheels, 8 driving wheels and 4 trailing wheels.This graph shows the calculated drawbar horsepower curves for five classes in the first wave of 4-8-4s: Lackawanna Q-1, Canadian National U-2-a, Northern Pacific A, Santa Fe 3751, and Canadian Pacific K-1. Neil Carlson. In the days of steam it was a normal practice to estimate the horsepower potential of a locomotive.The 4-8-4 was the ultimate wheel configuration for the modern passenger and fast freight steam locomotive. The eight driver arrangement was usable on almost every main line in North America and with drivers up to 80 inches in diameter allowed any reasonable speed that the railroad could handle. The Chicago, Milwaukee, St. Paul & Pacific Railroad's own motive power department designed a Class S-1, 4-8-4 in 1930. It was built by the Baldwin Locomotive Works and put on the roster as number 9700. It remained the lone Northern on the CMStP&P for the next seven years.The Canadian National Class U-4a was a class of five streamlined 4-8-4 Northern type steam locomotives they were built by the Montreal Locomotive Works in 1936 for the Canadian National Railway, numbered 6400 to 6404. These engines were used for crack passenger service on the Canadian National Railway for much of their careers. The Canadian National U-4 class was a result of wind tunnel ... This graph shows the calculated drawbar horsepower curves for five classes in the first wave of 4-8-4s: Lackawanna Q-1, Canadian National U-2-a, Northern Pacific A, Santa Fe 3751, and Canadian Pacific K-1. Neil Carlson. In the days of steam it was a normal practice to estimate the horsepower potential of a locomotive.The 4-8-4 was the ultimate wheel configuration for the modern passenger and fast freight steam locomotive. The eight driver arrangement was usable on almost every main line in North America and with drivers up to 80 inches in diameter allowed any reasonable speed that the railroad could handle. In 1930, the SP designed a locomotive similar to those Mountains that had a very large firebox (90.4 sq ft) and a four wheel trailing truck to support it. Thus, evolved the Southern Pacific 4-8-4 which was designated Class GS (Golden State) by the SP. In early 1937, six more "Golden States" arrived but this time from the Lima Locomotive Works.The St. Louis Southwestern Railroad acquired Northerns at three different times. It bought 10 Class L-1 Northerns in 1930 from the Baldwin Locomotive Works and assigned them road numbers 800 through 809. These 4-8-4s were oil burners with 70" drivers, 26 x 30 cylinders, a boiler pressure of 250 psi, a weight of 419,800 lbs and a tractive effort ... Union Pacific 4-8-4 #838, featuring classic elephant-ear smoke deflectors, appears to be slowly backing towards the water plug in Council Bluffs, Iowa on September 21, 1958. By the date of this photo the locomotive was finishing up its last days in freight service before retirement. Bernard Corbin photo. American-Rails.com collection. HistoryThe wheel arrangement of small diesel and petrol locomotives can be classified using the same notation as steam locomotives, e.g. 0-4-0, 0-6-0, 0-8-0. Where the axles are coupled by chains or shafts (rather than side rods) or are individually driven, the terms 4w (4-wheeled), 6w (6-wheeled) or 8w (8-wheeled) are generally used.These locomotives were the first in a large series of 4-8-4s of very similar design that totalled more than 200 engines. U-2a (works #1800-1819) numbered from 6100 to 6119 and delivered from Canadian Loco Works in 1927. U-2b (6120-6139), delivered from Montreal in 1927 (works #67351-67370), identical except for 233,400-lb weight on drivers and ... The Canadian National Class U-4a was a class of five streamlined 4-8-4 Northern type steam locomotives they were built by the Montreal Locomotive Works in 1936 for the Canadian National Railway, numbered 6400 to 6404. These engines were used for crack passenger service on the Canadian National Railway for much of their careers. The Canadian National U-4 class was a result of wind tunnel ... Jim Wrinn. 4-8-4. •YEARS BUILT: 1926 to 1950. •MANUFACTURERS: Baldwin, Lima, Alco, Canadian Locomotive Co., Canadian Pacific Railway, Montreal, Norfolk & Western. •OPERATED ON: Most sizable railroads that provided fast freight and passenger service.The St. Louis–San Francisco class 4500 was a class of 25 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1942-1943 and operated by the St. Louis–San Francisco Railway . The first three operated in passenger service, pulling trains such as the Meteor. The rest pulled freight throughout the system until ...October 4, 2000. Atchison, Topeka and Santa Fe 3751 is a class 3751 4-8-4 "Heavy Mountain" type steam locomotive built in May 1927 by the Baldwin Locomotive Works in Eddystone (Philadelphia), Pennsylvania for the Atchison, Topeka & Santa Fe Railway (ATSF). No. 3751 was the first 4-8-4 steam locomotive built for the Santa Fe and was referenced ...Santa Fe 3751. Santa Fe 3759. Santa Fe Class 2900. South African Class 25 4-8-4. South African Class 25NC 4-8-4. South African Class 26 4-8-4. South Australian Railways 500 class (steam) South Australian Railways 520 class. Southern Pacific 4449.These locomotives were the first in a large series of 4-8-4s of very similar design that totalled more than 200 engines. U-2a (works #1800-1819) numbered from 6100 to 6119 and delivered from Canadian Loco Works in 1927. U-2b (6120-6139), delivered from Montreal in 1927 (works #67351-67370), identical except for 233,400-lb weight on drivers and ...The Nashville, Chattanooga & St. Louis Railroad bought five 4-8-4 locomotives in 1930, which they called "Dixies" (instead of "Northerns" - a name that would seem inappropriate on a fine southern railroad). These 1930 "Dixies" came from the American Locomotive Company and were designated Class J-2 and assigned road numbers 565 through 569. First run. 6 February 1981. The South African Railways Class 26 4-8-4 of 1981, popularly known as the Red Devil, is a 4-8-4 steam locomotive which was rebuilt from a Class 25NC locomotive by mechanical engineer David Wardale from England while in the employ of the South African Railways. The rebuilding took place at the Salt River Works in Cape ...4-8-2, 4-6-4. Benefits. Deeper firebox than the 4-8-2. Under the Whyte notation for the classification of steam locomotives, 4-8-4 represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles.Swiss classification: 4/9; This wheel arrangement was proposed by Lima Locomotive Works in 1949 as a continuation of their "Super Power" concept, essentially an expansion of the 4-8-4. A larger firebox similar to the ones on the 2-6-6-6 locomotives built by Lima would have been fitted, allowing for greater power at speed. Despite promotion by ...Ultra-realistic Union Pacific 4-8-8-4 “Big Boy” steam locomotive. Complete and authentic operating controls and characteristics. Optional configurations for all levels of difficulty from manual operations to auto-fireman and auto-engineer assists, the locomotive is also compatible with Simple Controls. Three locomotive livery variations.The Union Pacific Railroad bought 45 4-8-4s in three orders from the American Locomotive Company. The second order of 15 locomotives (road numbers 820 through 834) was delivered in 1939. These locomotives were designated as Class FEF-2. They were designed to have 80" drivers, 25 x 32 cylinders, a boiler pressure of 300 psi, and a weight of 483, What Features Do the Steam Locomotives Have? Live Steam: Steam locomotives that produce live steam look life-like when moving around the track. The puffing smoke comes out the die-cast metal stack. Wheel Arrangement: Models with 4-8-4 configurations means there are 4 leading, 8 driving, and 4 trailing wheels. You'll find other steam locomotives ...What Features Do the Steam Locomotives Have? Live Steam: Steam locomotives that produce live steam look life-like when moving around the track. The puffing smoke comes out the die-cast metal stack. Wheel Arrangement: Models with 4-8-4 configurations means there are 4 leading, 8 driving, and 4 trailing wheels. You'll find other steam locomotives ...Nov 14, 2011 · This graph shows the calculated drawbar horsepower curves for five classes in the first wave of 4-8-4s: Lackawanna Q-1, Canadian National U-2-a, Northern Pacific A, Santa Fe 3751, and Canadian Pacific K-1. Neil Carlson. In the days of steam it was a normal practice to estimate the horsepower potential of a locomotive. Union Pacific's own team, in conjunction with Alco (both parties had also collaborated on the 4-6-6-4), significantly enlarged the Challenger to create the 4-8-8-4 Big Boy. The locomotive offered a tractive effort of roughly 135,000 pounds (37,650 pounds more than its smaller cousin) with speeds capable of 80 mph.These locomotives were the first in a large series of 4-8-4s of very similar design that totalled more than 200 engines. U-2a (works #1800-1819) numbered from 6100 to 6119 and delivered from Canadian Loco Works in 1927. U-2b (6120-6139), delivered from Montreal in 1927 (works #67351-67370), identical except for 233,400-lb weight on drivers and ...The St. Louis Southwestern Railroad acquired Northerns at three different times. It bought 10 Class L-1 Northerns in 1930 from the Baldwin Locomotive Works and assigned them road numbers 800 through 809. These 4-8-4s were oil burners with 70" drivers, 26 x 30 cylinders, a boiler pressure of 250 psi, a weight of 419,800 lbs and a tractive effort ... Nacional de Mexico 4-8-4 Locomotives in Mexico. The Ferrocarriles Nacionales de Mexico (National Railways of Mexico) bought a total of 32 Northern type, Class QR-1, locomotives in 1946. NdeM purchased 16 from the American Locomotive Company and 16 from the Baldwin Locomotive Works. On the NdeM these locomotives were called "Niágaras" and were ... The Santa Fe 3751 is a 4-8-4 steam locomotive, which is among the half-dozen such locomotives owned by the AT&SF. The Atchison, Topeka & Santa Fe Railway was a pioneer in developing better steam locomotives in the era of the presidency of Edward H. Ripley, who served from 1895 to 1920. In 1903, AT&SF developed the 2-10-2 wheel configuration ...There was an almost forgotten earlier 4-8-4 built in 1931 by ALCO. This three-cylinder experimental locomotive carried road number 800 and was designated Class HS-1a. It did not do well on its test runs and was put to work as a hump engine at Selkirk yard. Unfortunately, EMD F-7 passenger diesels were being delivered at the same time as the 4-8 ...Fred McLeod. Union Pacific 4-8-8-4 No. 4023 prepares to depart Cheyenne, Wyo., with a westward freight in May 1954. E.C. Storm. It was, more or less, an eight-coupled Challenger. The locomotive boasted both the adhesion of an eight-coupled articulated, needed to haul heavy trains, and large 68-inch driving wheels (only 1-2 inches smaller than ...First run. 6 February 1981. The South African Railways Class 26 4-8-4 of 1981, popularly known as the Red Devil, is a 4-8-4 steam locomotive which was rebuilt from a Class 25NC locomotive by mechanical engineer David Wardale from England while in the employ of the South African Railways. The rebuilding took place at the Salt River Works in Cape ... There was an almost forgotten earlier 4-8-4 built in 1931 by ALCO. This three-cylinder experimental locomotive carried road number 800 and was designated Class HS-1a. It did not do well on its test runs and was put to work as a hump engine at Selkirk yard. Unfortunately, EMD F-7 passenger diesels were being delivered at the same time as the 4-8 ...The 2-8-4's 4-wheel trailing truck permitted a huge firebox to be located after the boiler. The resulting greater steaming rate ensured that such a locomotive would never run out of power at speed, a common failing of older locomotives. Applying the ideas of the freight-minded Berkshire type to the Pacific resulted in a 4-6-4 locomotive.The Union Pacific Big Boy is a type of simple articulated 4-8-8-4 steam locomotive manufactured by the American Locomotive Company (ALCO) between 1941 and 1944 and operated by the Union Pacific Railroad in revenue service until 1962. The Canadian National No. 6400 is a Class U-4-a 4-8-4 "Northern" type steam locomotive built by Montreal Locomotive Works in 1936 for the Canadian National Railway, and the first U-4 class "Confederation" to be delivered. The Canadian National Railway used this locomotive for passenger service for much of its career. The Canadian National U-4 class was a result of wind tunnel research ... Union Pacific 844 is a class "FEF-3" 4-8-4 "Northern" type steam locomotive owned and operated by the Union Pacific Railroad for its heritage fleet.Built in December 1944 by the American Locomotive Company (ALCO) of Schenectady, New York, No. 844 is one of four surviving FEF series locomotives and the only one in operation.The wheel arrangement of small diesel and petrol locomotives can be classified using the same notation as steam locomotives, e.g. 0-4-0, 0-6-0, 0-8-0. Where the axles are coupled by chains or shafts (rather than side rods) or are individually driven, the terms 4w (4-wheeled), 6w (6-wheeled) or 8w (8-wheeled) are generally used.The Canadian National Class U-4a was a class of five streamlined 4-8-4 Northern type steam locomotives they were built by the Montreal Locomotive Works in 1936 for the Canadian National Railway, numbered 6400 to 6404. These engines were used for crack passenger service on the Canadian National Railway for much of their careers. The Canadian National U-4 class was a result of wind tunnel ...The Southern Pacific GS-4 is a class of streamlined 4-8-4 "Northern" type steam locomotive operated by the Southern Pacific Railroad (SP) from 1941 to 1958. A total of twenty-eight were built by the Lima Locomotive Works, numbered 4430 through 4457. GS stands for "Golden State" or "General Service." Unlike the GS-3, the GS-4 had a dual ...Under the Whyte notation for the classification of steam locomotives, 4-8-4 represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The first United States 4-8-2s were in the employment of the C&O as the J-1 design, in 1911. Unlike the Hendrie 4-8-2s, this was basically an enlarged 4-6-2 for passenger trains over the Appalachians. The 4-8-2s used by the New York Central, the "Mohawks" were also an enlarged 4-6-2, essentially a K-11 type with an extra axle.The Canadian National No. 6400 is a Class U-4-a 4-8-4 "Northern" type steam locomotive built by Montreal Locomotive Works in 1936 for the Canadian National Railway, and the first U-4 class "Confederation" to be delivered. The Canadian National Railway used this locomotive for passenger service for much of its career. The Canadian National U-4 class was a result of wind tunnel research ... The class used the 4-8-4 configuration of the modified 500B class, but was also designed for work on branch lines with light 60 lb/yd (29.8 kg/m) rail with a reduced tender load. The considerable weight of the locomotive was spread over eight axles, four driving and four in the leading and trailing trucks, yielding the necessary light axle ...The New York Central Railroad's Niagara was a 4-8-4 "Northern" type steam locomotive named after the Niagara River and Falls. It had a 4-8-4 wheel arrangement and is considered as one of the most efficient 4-8-4 locomotives ever built. The first New York Central Railroad Northern was ordered in 1931: No. 800, [1] an experimental locomotive that ... The Delaware, Lackawanna & Western designed and purchased five 4-8-4s (road numbers 1501 through 1505) to increase its motive power for the "Lackawanna Limited" and other passenger trains. These locomotives were assigned Class Q-1 and were built by the American Locomotive Company after the Northern Pacific took delivery of the first 4-8-4s in 1927.The Canadian National No. 6400 is a Class U-4-a 4-8-4 "Northern" type steam locomotive built by Montreal Locomotive Works in 1936 for the Canadian National Railway, and the first U-4 class "Confederation" to be delivered. The Canadian National Railway used this locomotive for passenger service for much of its career. The Canadian National U-4 class was a result of wind tunnel research ... Between 1936 and 1940 it built 28 Class O-5a Northerns (road numbers 5608 through 5635) in its own shops in W. Burlington, IA. All 36 of these locomotives had 74" drivers, 28 x 30 cylinders, 250 psi boiler pressure, and had a traction effort of 67,500 lbs. The first eight weighed 461,000 lbs and the balance weighed 473,700 pounds. Number 4000 was delivered to Omaha at 6PM, September 5, 1941. The 25 Big Boys were built in two groups. The first group of 20 locomotives, called "Class 1", were built starting in 1941. They were numbered 4000-4019. The second group of 5 locomotives, "Class 2", were built in 1944. They were numbered 4020-4024. Nov 1, 2004 · It has flaws, but Broadway Limited Imports has shown an ability to learn from mistakes. Fans of western steam power will be happy to have it and to look forward to comparing BLI releases of Santa Fe (and Union Pacific) locomotives. HO Santa Fe 4-8-4. Price: $329.99. Manufacturer: Missouri Pacific 4-8-4 Northerns The Missouri Pacific Railroad converted all 25 of its 2-8-4 Berkshires into 4-8-4 Northerns in the early 1940s. The rebuilt locomotives (road numbers 2101 through 2125) were given 75" drivers, greater boiler capacity, a cast steel engine bed and roller bearings on all axles. S GAUGE 4-8-4 NORTHERN STEAM LOCOMOTIVE BY LIONEL. Price: $474.99 (no. 48054) Features: Can-style motor, die-cast metal construction, smoke unit, both RailSounds and traditional “choo-choo” chuff sounds. Pros: Captures the toy-like style of the postwar model, runs well. Cons: “Choo-choo” sounds are too high pitched and ruin the effect ...Fred McLeod. Union Pacific 4-8-8-4 No. 4023 prepares to depart Cheyenne, Wyo., with a westward freight in May 1954. E.C. Storm. It was, more or less, an eight-coupled Challenger. The locomotive boasted both the adhesion of an eight-coupled articulated, needed to haul heavy trains, and large 68-inch driving wheels (only 1-2 inches smaller than ...Each end of the double-ended locomotive has a four-wheel truck to guide the locomotive at speed, giving the R1 a 4-8-4 wheel arrangement in the Whyte notation (AAR: 2-D-2; UIC: 2'Do'2). Besides the R1, the PRR did not build or order any other 4-8-4 locomotives, however the T1 duplex was essentially a 4-8-4 with 2 sets of driving wheels, making ...Feb 9, 2018 · Rio Grande Info cited Robert Schaefer's "D&RGW 4-8-4 Westerns" in "The Prospector", Volume 2 Number 2 for the very interesting origin story of this class. Originally the D&RGW was attracted to Alco's variation on the Delaware, Lackawanna & Western's 4-8-4, in part because Alco had developed a single-piece cylinder and frame casting. Water cap. Factor of adh. Norfolk and Western 475 is a 4-8-0 "Mastodon" type steam locomotive built by the Baldwin Locomotive Works in June 1906 as part of the Norfolk and Western Railway's (N&W) first order of M class numbered 375–499. It was first assigned to haul freight trains on the N&W mainline before being reassigned to branch line ...S2. Numbers. 201–240. Retired. 1954-1956. Disposition. All scrapped, but one tender survives. he Milwaukee Road S2 Class was a class of 40 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1937 and 1940 and operated by the Milwaukee Road until the mid 1950s. The locomotives saw service in pulling freight..Between 1936 and 1940 it built 28 Class O-5a Northerns (road numbers 5608 through 5635) in its own shops in W. Burlington, IA. All 36 of these locomotives had 74" drivers, 28 x 30 cylinders, 250 psi boiler pressure, and had a traction effort of 67,500 lbs. The first eight weighed 461,000 lbs and the balance weighed 473,700 pounds.The St. Louis–San Francisco class 4500 was a class of 25 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1942-1943 and operated by the St. Louis–San Francisco Railway . The first three operated in passenger service, pulling trains such as the Meteor. The rest pulled freight throughout the system until ...Missouri Pacific 4-8-4 Northerns The Missouri Pacific Railroad converted all 25 of its 2-8-4 Berkshires into 4-8-4 Northerns in the early 1940s. The rebuilt locomotives (road numbers 2101 through 2125) were given 75" drivers, greater boiler capacity, a cast steel engine bed and roller bearings on all axles.Chesapeake & Ohio 614 is a class "J-3-A" 4-8-4 "Greenbrier" (Northern) type steam locomotive built in June 1948 by the Lima Locomotive Works in Lima, Ohio for the Chesapeake and Ohio Railway (C&O) as a member of the J-3-A class. As one of the last commercially built steam locomotives in the United States, the locomotive was built with the ... N&W Class J 4-8-4 Designed for optimum-speed passenger service, the “J” was the last mainline steam locomotive to run in the United States. The Class J 4-8-4 has returned to the Bachmann HO line in a DCC Sound Value version that includes a SoundTraxx ® steam package with authentic prototypical chuff, short and long whistles, bell, air pump ...First run. 6 February 1981. The South African Railways Class 26 4-8-4 of 1981, popularly known as the Red Devil, is a 4-8-4 steam locomotive which was rebuilt from a Class 25NC locomotive by mechanical engineer David Wardale from England while in the employ of the South African Railways. The rebuilding took place at the Salt River Works in Cape ... Between 1936 and 1940 it built 28 Class O-5a Northerns (road numbers 5608 through 5635) in its own shops in W. Burlington, IA. All 36 of these locomotives had 74" drivers, 28 x 30 cylinders, 250 psi boiler pressure, and had a traction effort of 67,500 lbs. The first eight weighed 461,000 lbs and the balance weighed 473,700 pounds. Rio Grande Info cited Robert Schaefer's "D&RGW 4-8-4 Westerns" in "The Prospector", Volume 2 Number 2 for the very interesting origin story of this class. Originally the D&RGW was attracted to Alco's variation on the Delaware, Lackawanna & Western's 4-8-4, in part because Alco had developed a single-piece cylinder and frame casting.These locomotives were the first in a large series of 4-8-4s of very similar design that totalled more than 200 engines. U-2a (works #1800-1819) numbered from 6100 to 6119 and delivered from Canadian Loco Works in 1927. U-2b (6120-6139), delivered from Montreal in 1927 (works #67351-67370), identical except for 233,400-lb weight on drivers and ... Shop online for 62 4-8-4 model train locomotives at discounts up to 28%. Steam - HO is the most popular of the 3 4-8-4 model train locomotives categories, then Steam - N, and Diesel - N. Broadway Limited Imports is ranked #1 out of 4 4-8-4 model train locomotives manufacturers, followed by Kato USA Inc, and Athearn.The B&O bought thirteen 4-8-2s from the Boston & Maine. They were given road numbers 5650 through 5662 and were designated as Class T-4 and were used until 1958. There are no surviving B&O "Mountains". The Class Ts (numbers 5500 & 5501) were scrapped in 1953.4-8-2. Under the Whyte notation for the classification of steam locomotives, 4-8-2 represents the wheel arrangement of four leading wheels, eight powered and coupled driving wheels and two trailing wheels. This type of steam locomotive is commonly known as the Mountain type. [1]These locomotives were the first in a large series of 4-8-4s of very similar design that totalled more than 200 engines. U-2a (works #1800-1819) numbered from 6100 to 6119 and delivered from Canadian Loco Works in 1927. U-2b (6120-6139), delivered from Montreal in 1927 (works #67351-67370), identical except for 233,400-lb weight on drivers and ... October 4, 2000. Atchison, Topeka and Santa Fe 3751 is a class 3751 4-8-4 "Heavy Mountain" type steam locomotive built in May 1927 by the Baldwin Locomotive Works in Eddystone (Philadelphia), Pennsylvania for the Atchison, Topeka & Santa Fe Railway (ATSF). No. 3751 was the first 4-8-4 steam locomotive built for the Santa Fe and was referenced ...Reading 2101 is a preserved American class "T-1" 4-8-4 "Northern" type steam locomotive constructed in 1945 for use by the Reading Company.Constructed from an earlier "I10SA" 2-8-0 "Consolidation"-type locomotive built in 1923, the 2101 handled heavy coal train traffic for the Reading until being retired from revenue service in 1959.The St. Louis Southwestern Railroad acquired Northerns at three different times. It bought 10 Class L-1 Northerns in 1930 from the Baldwin Locomotive Works and assigned them road numbers 800 through 809. These 4-8-4s were oil burners with 70" drivers, 26 x 30 cylinders, a boiler pressure of 250 psi, a weight of 419,800 lbs and a tractive effort ... Under the Whyte notation for the classification of steam locomotives by wheel arrangement, the 4-8-4+4-8-4 is a Garratt locomotive. The wheel arrangement is effectively two 4-8-4 locomotives operating back to back, with the boiler and cab suspended between the two engine units. Shop online for 62 4-8-4 model train locomotives at discounts up to 28%. Steam - HO is the most popular of the 3 4-8-4 model train locomotives categories, then Steam - N, and Diesel - N. Broadway Limited Imports is ranked #1 out of 4 4-8-4 model train locomotives manufacturers, followed by Kato USA Inc, and Athearn.A 4-8-8-4 in the Whyte notation for the classification of steam locomotives by wheel arrangement, is a locomotive with a four-wheel leading truck, two sets of eight driving wheels, and a four-wheel trailing truck. Only one model of locomotives has ever used this configuration, and that is commonly known as "Union Pacific Big Boys" after the ... S2. Numbers. 201–240. Retired. 1954-1956. Disposition. All scrapped, but one tender survives. he Milwaukee Road S2 Class was a class of 40 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1937 and 1940 and operated by the Milwaukee Road until the mid 1950s. The locomotives saw service in pulling freight..Under the Whyte notation for the classification of steam locomotives by wheel arrangement, the 4-8-4+4-8-4 is a Garratt locomotive. The wheel arrangement is effectively two 4-8-4 locomotives operating back to back, with the boiler and cab suspended between the two engine units. Dec 20, 2016 · The Big Boy utilized a 4-8-8-4 wheel arrangement and was the only locomotive to do so. At the front of the engine was a four-wheel leading truck that had 36 in (.91 m) wheels. This was followed by eight 68 in (1.73 m) drive wheels, with a single piston driving a set of four wheels on each side of the engine. With this in mind, the 520 class was commissioned, combining the better features of the earlier 500 and 620 class locomotives. Design. The class used the 4-8-4 configuration of the modified 500B class, but was also designed for work on branch lines with light 60 lb/yd (29.8 kg/m) rail with a reduced tender load. The considerable weight of the ... The Great Northern Railway obtained its first "Northerns" in 1929, when six Class S-1s were delivered from the Baldwin Locomotive Works. These 4-8-4s were given road numbers 2550 through 2555 and had 73" drivers, 28 x 30 cylinders, a boiler pressure of 250 psi, a weight of 472,120 lbs and a tractive effort of 68,466 pounds.Nov 1, 2004 · It has flaws, but Broadway Limited Imports has shown an ability to learn from mistakes. Fans of western steam power will be happy to have it and to look forward to comparing BLI releases of Santa Fe (and Union Pacific) locomotives. HO Santa Fe 4-8-4. Price: $329.99. Manufacturer: Under the Whyte notation for the classification of steam locomotives, 4-8-4 represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. To that end he ordered the company's superintendent of motive power and rolling equipment, E. Paul Gangewere, to get together with the design engineers at the Baldwin Locomotive Works to develop a plan to convert 30 of the railroad's I-10a 2-8-0 Consolidations to new 4-8-4 Northerns. These 30 steam locomotives (road numbers 2100 -2129) were ...
It has flaws, but Broadway Limited Imports has shown an ability to learn from mistakes. Fans of western steam power will be happy to have it and to look forward to comparing BLI releases of Santa Fe (and Union Pacific) locomotives. HO Santa Fe 4-8-4. Price: $329.99. Manufacturer:. I survived the children
4-8-4. The Northerns are steam locomotives that represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The type was first used by the Northern Pacific Railway, and initially named the Northern Pacific, but railfans and railroad employees ...4-8-4. The Northerns are steam locomotives that represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The type was first used by the Northern Pacific Railway, and initially named the Northern Pacific, but railfans and railroad employees ...Under the Whyte notation for the classification of steam locomotives by wheel arrangement, the 4-8-4+4-8-4 is a Garratt locomotive. The wheel arrangement is effectively two 4-8-4 locomotives operating back to back, with the boiler and cab suspended between the two engine units. The 2-8-4's 4-wheel trailing truck permitted a huge firebox to be located after the boiler. The resulting greater steaming rate ensured that such a locomotive would never run out of power at speed, a common failing of older locomotives. Applying the ideas of the freight-minded Berkshire type to the Pacific resulted in a 4-6-4 locomotive. Rio Grande Info cited Robert Schaefer's "D&RGW 4-8-4 Westerns" in "The Prospector", Volume 2 Number 2 for the very interesting origin story of this class. Originally the D&RGW was attracted to Alco's variation on the Delaware, Lackawanna & Western's 4-8-4, in part because Alco had developed a single-piece cylinder and frame casting.Nov 21, 2010 · Thierry Stora, of the French Compound Locomotives homepage, contends that the problems lay in the difference between the specified minimum curve radius (80 m or 262 ft) and the actual minimum, which could be as low as 50 m (164 ft). As a result, these 4-8-4s were limited to 50 mph (80 kph) Data from "4-8-4 Locomotives on the Northern Pacific," Baldwin Locomotives (1937), pp. 27-28 and NP to 1944 Locomotive Diagrams supplied in May 2004 by Allen Stanley from his extensive Rail Data Exchange. Works numbers were 62163-62166 in March 1938, 62167-62168. in April and 62169-62170 in May. As suggested by the 1937 account of the A-2s ... The Delaware, Lackawanna & Western designed and purchased five 4-8-4s (road numbers 1501 through 1505) to increase its motive power for the "Lackawanna Limited" and other passenger trains. These locomotives were assigned Class Q-1 and were built by the American Locomotive Company after the Northern Pacific took delivery of the first 4-8-4s in 1927.The 4-8-4's were given Class J and built by the master steam builders at N&W's Roanoke, Virginia shops. These machines could haul the mail, quite literally, and were the most powerful 4-8-4's ever built with tractive efforts reaching 80,000 pounds, boiler pressures of 300 psi, and perfectly couter-balanced to reach unimaginable speeds of 140 mph!Get Updates. Canadian National U-class 4-8-4 locomotives proved to be the most versatile of the type operated in North America. It’s generally accepted that the ultimate in steam power was the 4-8-4 Northern type, if defined by criteria that includes speed, power, technology, and, perhaps most importantly, versatility.05001557. Added to NRHP. January 25, 2006. Spokane, Portland & Seattle 700 is the oldest and only surviving example of the class "E-1" 4-8-4 "Northern" type steam locomotive and the only surviving original Spokane, Portland and Seattle steam locomotive. It was built by the Baldwin Locomotive Works in May 1938. 4-8-4. Benefits. Better high speed performance. Drawbacks. Wheel slip. A 4-4-4-4 steam locomotive, in the Whyte notation for describing locomotive wheel arrangements, has a four-wheel leading truck, two sets of four driving wheels, and a four-wheel trailing truck. While it would be possible to make an articulated locomotive of this arrangement ...To that end he ordered the company's superintendent of motive power and rolling equipment, E. Paul Gangewere, to get together with the design engineers at the Baldwin Locomotive Works to develop a plan to convert 30 of the railroad's I-10a 2-8-0 Consolidations to new 4-8-4 Northerns. These 30 steam locomotives (road numbers 2100 -2129) were ...4-4-4T Cóndor of the Gran Ferrocarril de Venezuela in 1901. The 3 ft 6 in (1,067 mm) gauge Gran Ferrocarril de Venezuela (Great Venezuela Railway) acquired a class of three 4-4-4T locomotives in 1892, the Cóndor, Gavilán and Halcón. They were built by Hartmann's Sächsische Maschinenfabrik in Chemnitz, Germany. Their maximum speed was 70 ... Jul 26, 2019 · The lights and sounds came on at 7.5V. The locomotive started moving smoothly at around 11V at a scale 3.5 scale mph. The 4-8-4 achieved at top speed of 79 scale mph at 22V. The full-size GS-4s maximum speed was 110 mph. Engine and idle sounds, brake squeal, and the smoke unit are the only effects available in DC. Each end of the double-ended locomotive has a four-wheel truck to guide the locomotive at speed, giving the R1 a 4-8-4 wheel arrangement in the Whyte notation (AAR: 2-D-2; UIC: 2'Do'2). Besides the R1, the PRR did not build or order any other 4-8-4 locomotives, however the T1 duplex was essentially a 4-8-4 with 2 sets of driving wheels, making ....